Ubiquiti UniFi nanoHD

Compact 802.11ac Wave2 MU-MIMO Enterprise Access Point. Deploy the UniFi nanoHD AP in high-densityenvironments requiring maximum wireless performance and minimal footprint. The UniFi nanoHD AP features simultaneous, dual-band, 4x4 MU-MIMO technology and convenient 802.3af PoE compatibility.

1. Environment: Indoor
2. Simultaneous Dual-Band
3. 2.4 GHz Radio Rate: 300 Mbps
4. 2.4 GHz MIMO: 2x2
5. 5 GHz Radio Rate: 1733 Mbps
6. 5 GHz MIMO: 4x4
7. PoE Mode: 802.3af PoE
8. Ceiling Mount
9. Wall Mount
10. Wireless Uplink
11. DFS Certification

Specifications UniFi nanoHD

Dimensions: 160 x 160 x 32.65 mm (6.30 x 6.30 x 1.29")
Weight: 300 g (10.6 oz)
With Mounting Kits: 315 g (11.1 oz)
Networking Interface: (1) 10/100/1000 Ethernet Port
Buttons: Reset
Power Method: 802.3af PoE
Power Supply: UniFi Switch (PoE)
Power Save: Supported
Beamforming: Supported
Maximum Power Consumption: 10.5W
Supported Voltage Range: 44 to 57VDC
TX Power:
- 2.4 GHz: 23 dBm
- 5 GHz: 26 dBm
MIMO:
- 2.4 GHz: 2x2
- 5 GHz: 4x4
Radio Rates:
- 2.4 GHz: 300 Mbps
- 5 GHz: 1733 Mbps
Antennas:
- 2.4 GHz: (2) Single-Port, Single-Polarity Antennas, 2.8 dBi each
- 5 GHz: (2) Single-Port, Dual-Polarity Antennas, 3 dBi each
Wi-Fi Standards: 802.11 a/b/g/n/r/k/v/ac/ac-wave2
Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), 802.11w/PMF
BSSID: 8 per Radio
Mounting: Wall/Ceiling (Kits Included)
Operating Temperature: -10 to 70 C (14 to 158 F)
Operating Humidity: 5 to 95% Noncondensing
Certifications: CE, FCC, IC

Package Contents

UniFi nanoHD AP, Mounting Bracket, Ceiling Backing Plate, Screws, Flat Head Screws, Keps Nuts, Screw Anchors, Gigabit PoE (48V, 0.5A) with Mount Bracket, Power Cord.

Please note: PoE adapter + Power Cord are included only in the single-pack of the UAP-nanoHD!

Manual	UAP-nanoHD Manual	UAP-nanoHD_QSG.pdf
Datasheet	UAP-nanoHD Datasheet	UniFi_nanoHD_AP_DS.pdf