Discount
You get discount as Wimood reseller.
Notify me
Price tiers
Order value | Quantity | Price |
> € 0,00 | > 0 | € 107,90 |
Fiber PatchCord Cable UPC/APC
DELTA-XGS-PON Aansluitkabel, 2m
UniFi Dream Machine Pro
UniFi Dream Machine Pro Max
UniFi Dream Machine Special Edition
Zaram XGS-PON ONU SFP+
Description
The Zaram XGSPON-STICK is "Embedded XGSPON-MAC Optical Network Terminal (ONT)" with Small Form-factor Pluggable(SFP+) packaging. This module is suited to setup a XGS-PON connection with Delta or KPN's XGS-PON Fiber Network.
The Zaram ONT ZXOS11NPI is an XGS-PON SFP ONT, an Optical Network Termination
solution for mobile backhaul and midhaul or enterprise applications where network
synchronization and operational efficiency are key requirements. With its smallest possible
footprint, low power consumption and complete feature set, it enables operators to
leverage fiber PON (Passive Optical Networks) for more revenues and very efficient
transport of backhaul and midhaul mobile traffic. For best synchronization performance this
ONT supports IEEE1588v2 requirement.
Short Instructions for Delta/KPN XGS-PON setup
- Please note: Use PON-ID code ZRMTxxxxxxxx (and not ZarmCNxxxxxxxx) to activate.
- This SFP-module requires a SC/UPC (blue) connector (see accessories).
Note: Please read our full article on the setup for Delta/KPN for additional information.
Specifications
- Low Power Consumption SFP+ Formfactor with Embedded ZX300 SoC
- Compliant with standard SFP+ form factor SFF-8431, SFF-8472, GR-468
- XGS-PON uplink, G.9807 series and G.988 GPON OMCI compliant
- Very low power consumption, typically less than 2W
- SFF-8472 DDM
- Class N1/N2
- APD Receiver : -28.5dBm
- 1270nm DFB Burst Laser
- Commercial/Industrial Temperature
- IEEE 1588, ToD, SyncE Support(Only EPI supports SyncE)
- 10G XFI Interface
The Zaram ONT ZXOS11NPI is compliant with the ITU-T G.9807.1 XGS-PON specification. It supports 9.953 Gb/s downstream and upstream at a physical layer rate and time-of-day synchronization functions. It is compliant with the standard PON definitions for configuration, management, performance, security and monitoring functions.
Hardware
Main Chip: | ZARAM SoC (ZX300) |
Flash Memory: | Embedded 256Mbit (Serial Flash*1) |
Memory: | Embedded 512Mbit, LPDDR@ SDRAM *2 |
Wavelength: | 1577nm Downstream, 1270nm Upstream |
Uplink Interface: | 10 GPON port (SC/UPC, SFP compliant interface) |
Service Interface: | SFP+ Compatible SERDES Interface |
Environment Conditions
Input power: | Single 3.3V, SFP+ Compatible |
Power Consumption: | Max 2.00W (Meets SFP+ Power Class Level III) |
Operation temperature/ humidity: | -40C~85C / 5%~95% (relative humidity) |
Storage temperature: | -40° C~85° C |
Product Standards
Type: | XGSPON ONU in SFP MSA Footprint |
MAC: | Integrated XGSPON ITU-T G.09807, 989 MAC |
Standards: |
ITU-T G.989.x-compliant NGPON2 TC sublayer ITU-T G.9807.x-compliant XGSPON TC sublayer Complies with ITU-T G.988 OMCI 9.95328Gbps 1260~1280nm Burst Mode Transmitter 9.95328Gbps 1575~1580nm Continuous Mode Receiver Meets MSA specification of 2.0Watt Typical Power Consumption ~ 1.95Watt XFI interface operation at 10 Gbps Digital diagnostic monitor interface compatible with SFF-8472 Compliant with SFP MSA INF-8074i |
Package content
Zaram SFP+ ONU ModuleNote: This SFP-module requires a SC/UPC (blue) connector (see accessories) to connect with KPN/Delta XGS-PON network.
Downloads
Datasheet | Datasheet | Product Brief_ZXOS11NPI.pdf |
Manual | Product guide | ZXOS11NPI_XGSPON_product guide(Zaram)_rev2.2_20230127.pdf |